OUR PRODUCTS RANGE  
 

» Industrial Pulverisers
» Bulk Material Handling Equipment
» Process Equipment
» Projects/Systems
 
 
 
PULVERISERS RANGE  
 

» Hammer Mill
» Micro Pulveriser
» Pin Mill
» Universal Mill
» Turbo Classifier Mill
» Whirlpul Micronizer
» Air Swept Mills
» Disc Mills
» Bucket Elevator
» Air Swept Mill
» Cattle Feed Plant
» Aqua Feed Plant
» Poultry Feed Plant
» Salt Refining Plant
» Spices Plant
» Screw Conveyor
» Bag Weigher
» Salt Refinery
 
 

Premium Pulman Pvt. Ltd. : Manufacturer & Exporter of Puverisers:Bucket Elevators : Bucket elevators manufacturer, bulk material handling equipments like bucket elevators, screw conveyors, s type coveyors supplier India. » SALIENT FEATURES:-


  • Centrifugal type Bucket Elevators
  • Continuous Type Bucket Elevators
  • Double Legged (Heavy Duty) Bucket Elevators
  • Galvanised (Light Duty) Bucket Elevators
  • Cement Plant Bucket Elevators
  • Super Capacity Bucket Elevators
  • Standard Parts & Accessories
  • Bucket Elevators Systems
 
» Bucket Elevators Profile :-
 

BUCKET ELEVATORS are ideal for elevating a variety of bulk materials economically, efficiently and reliably. The two main type of Bucket Elevators are Centrifugal type and Continuous type.
 
 
 
» CENTRIFUGAL TYPE-CE BUCKET ELEVATORS :-
 

Extremely suitable for handling fine, free flowing materials. Lover feed point, simpler loading and lesser no. of buckets compared to continuous. Buckets are on chain or belt and travel at high speeds to effect discharge by centrifugal forces as they pass around the head pulley. The buckets are mounted at intervals on a chain belt.


Centrifugal Belt Type-CEB :-
 

The elevator belts are normally friction surface beltson, which the buckets are mounted. Buckets normally used are style AA malleable iron buckets. Drive is through shaft mounted gear reducer with built-in back stop, or through geared motors with chain drive.



Centrifugal Chain Type-CEC :-
 

Buckets are mounted on chains, which are std. combination chains or steel side bar Chains. Heat-treated chains or steel side bar chains. Heat-treated chains are also available. Buckets normally used are style AA malleable iron buckets. Drive is through shaft mounted gear reducer with built-in backstop or through geared motor with chain drive.
   
Centrifugal Type :-

Bucket         Model No.
 Size
Capacity
Tons/hour
Approx. H.P. Reqmts.
Material Density gms/cc Material Density gms/cc
(mm) 0.4 0.8 1.2 1.6 0.4 0.8 1.2 1.6
150 x 100 PBE-CEB-03 1.5 3 4 6 1.5 2 2 3
200 X 100 PBE-CEB-10 5 10 12 15 2 3 5 5
200 X 125 PBE-CEB-20 10 20 28 35 3 5 7.5 7.5
225 X 125 PBE-CEB-22 11 22 32 40 3 7.5 7.5 10
250 X 150 PBE-CEB-25 13 25 40 50 5 7.5 10 12.5
300 X 175 PBE-CEB-45 22 45 65 90 5 10 15 20

Note :-
1. Capacity and H.P. requirements given are for belt type elevators (designated CEB or COB). For chain type (designated CEC or COC) capacity will be reduced by approx. 10%..

2. H.P. requirements indicated are for maximum centers of 15 meters Increase or decrease in centers, increases or decreases HP required.
 
 
 
» CONTINUOUS TYPE-CO BUCKET ELEVATORS :-
 

Continuous Bucket elevators have buckets mounted continuousily on chain or belt These elevators are suitable for sluggish, aerated and feiable material or material with larger % of lumps. Loading of the buckets is through loading leg and discharged over the face of the preceding bucket while passing around the headwheel.


Continuous Belt Type- COB :-
 

The buckets are mounted continuously on the normally friction surface belts. Continuous type steel buckets are used leaving minimum clearance between the buckets. Drive is through shaft mounted gear reducer with built in back stop or through geared motor with chain drive.



Continuous Chain Type- COC :-
 

Buckets are mounted continuously on chains which are std. combination chains or steel side bar chains Buckets are continuous type, leaving minimum clearance between the buckets. Drive is through shaft mounted gear reducer with built in back stop or through geared motor with chain drive.
   

Continuous Type :-

Bucket         Model No.
 Size
Capacity
Tons/hour
Approx. H.P. Reqmts.
Material Density gms/cc Material Density gms/cc
(mm) 0.4 0.8 1.2 1.6 0.4 0.8 1.2 1.6
150 x 100 PBE-CEB-04 2 4 6 8 2 2 3 3
200 X 100 PBE-CEB-12 6 12 18 24 3 3 5 5
200 X 125 PBE-CEB-20 10 20 30 40 3 5 7.5 10
225 X 125 PBE-CEB-24 12 24 38 48 3 5 10 12.5
250 X 150 PBE-CEB-28 14 28 44 55 5 7.5 10 12.5
300 X 175 PBE-CEB-46 23 46 70 92 5 12.5 15 20

Note :-
1. Capacity and H.P. requirements given are for belt type elevators (designated CEB or COB). For chain type (designated CEC or COC) capacity will be reduced by approx. 10%.

2. H.P. requirements indicated are for maximum centers of 15 meters Increase or decrease in centres, increases or decreases HP required.

 
 
 
 
 


 
 
» Double Legged Bucket Elevators     (Heavy Duty) :
 


This is suitable for large Volume handling of grains, feeds etc. The elevator is self-supporting with extra large heads and boot pulleys. They are fabricated from heavy gauge steel and are dust and waterproof and with provision for easy clean out.



 
 
   
» Galvanised (Light Duty) Bucket Elevators :
 


Fabricated from galvanised steel sheets, is of single leg construction. Extremely suitable for small feed mills and drives with capacity upto 20 t/hr;

The elevator is with intake chutes, suitable discharge spouts, inspection door and cleanout in boot.


 
 
 
 


 
 
   
 
 


 
 
» CEMENT PLANT BUCKET     ELEVATOR :
 


The se are usually centrifugal chain type bucket elevators with buckets mounted on a single strand of chain The buckets are normally a special combination of AA and continuous type bucket




 
 
 
» SUPER CAPACITY BUCKET ELEVATOR :
 


These are continuous chain type bucket elevators where buckets are mounted between two strands of chain SC bucket elevators are especially suitable for handling large capacities of friable, heavy or abrasive material in fines or lumps.



 
 
 
 


 
 
 
» Parts & Accessories :
 
   
  • Style AC Bucket
  • Continuous Style Elevator Bucket
  • Style AA Bucket
  • Chain Attachment
  • Elevator Chain
  • Pulleys
  • Sprocket Wheels
  • Service Platform

 
 
 
 
 


 
 
» HEAD SECTION :
 


Head section is of heavy gauge construction with easy access for maintenance The section is dust and weather tight. The head shaft is provided with antifriction bearing, discharge spout is provided with angular flange.




 
 
 
 
 


 
 
» BOOT SECTION :
 


Boot section is fabricated out of heavy gauge sheet metal. The section is dust and water tight and is provided with handy door for easy inspection of shaft and pulley Clean out slides are also incorporated.



 
 
 
 
 


 
 
» LEGGING SECTION :
 


Legging section is either single or double legged depending on the requirements. The legging is in sections with suitable connecting flanges for perfect fit and alignment of sections. Doors are provided giving easy access for maintenance and cleaning.



 
 
 


Home
| Profile | Our Group | Demonstration facility | Quality Control | Contact | Inquiry
SEO By : Va Infotech