OUR PRODUCTS RANGE  
 

» Industrial Pulverisers
» Bulk Material Handling Equipment
» Process Equipment
» Projects/Systems
 
 
 
PULVERISERS RANGE  
 

» Hammer Mill
» Micro Pulveriser
» Pin Mill
» Universal Mill
» Turbo Classifier Mill
» Whirlpul Micronizer
» Air Swept Mills
» Disc Mills
» Bucket Elevator
» Air Swept Mill
» Cattle Feed Plant
» Aqua Feed Plant
» Poultry Feed Plant
» Salt Refining Plant
» Spices Plant
» Screw Conveyor
» Bag Weigher
» Salt Refinery
 
 

pin mill, pin mill manufacturer, pin mill supplier, pin mill exporter, pin pulveriser, pin pulveriser manufacturer
» SALIENT FEATURES:-

  • L & T Type Pins.
  • Pneumatic Conveying can be offered.
  • MOC In MS / SS wear parts /SS Complete
  • Round Pins in stator and or Rotor with FINE PITC.
  • Whizzer Type PIN MILL (Screen less) can be provided.
  • More out put than conventional Mill
  • NARBOW BAND of fineness
  • Final product cool and smooth
  • Less Power consumption
  • OCCUIES LESS SPACE
  • RAPID & ADEQUATE ejection of pulverized material from all over the screen.
  • Allows FEED MATERIAL with higher percentage of FAT and MOISTUERE.
  • STURDY & VIBRATION FREE CONSTRUCTION.
  • Easy to CLEAN & Easy to Operate.
===== ====== ============ ======== ======= ===
Demonstration Facility Available....
===== ====== ============ ======== ======= ===
 
» PIN MILL PROFILE :-
 


GENERAL:

The FEED MATERIAL is FED into CENTRE of ROTOR and is conveye
d to the PERIPHERY through series REATER PLATE, thus gradually reducing to find powder. SCREEN DRUM fitted around ROTOR, permits ground material of desired FINENESS to come out of the MILL for collection.

IMPORTANT TECHNICAL INFORMATION ON PIN MILLS:


PREMIUM PIN MILL is specially designed pulverized to deal efficietly and economically with a wide range of materials to grind them to predetermined fineness from COARSE to FINE POWDER up to 150 MESH (100 Micron) and above.

The grinding operation is effected through beating, shearing, crushing and auto collision of material. Feeding is manually for SMALL MILLS and for MEDIUM and LARGE CAPACITY MILLS, either HOPPER with HORIZONTAL GATE VALVE with rack & pinion is provided or SCREW FEEDER with VARIABLE SPEED DRIVE. This will give uniform and controlled FEED into the MILL.


 
 
 
» SMALL SIZE PIN MILL MOUNTED ON CABINET :-
 


Models PPM-06,08 & 10 are designed for small capacity output and usually are FED manually through Feed TRAY and a collection CABINENT with BALLN. The ground material is falls in to cabinet. The mill is stopped material is collected.
pin mill, pin mill manufacturer, pin mill supplier, pin mill exporter, pin pulveriser, pin pulveriser manufacturer


TECHNICAL SPECIFICATIONS :

MODEL DIA
MM
H.P. R.P.M. SPACE REQUIRED
L x B x H in mm
B.m.m.
PPM-06 160 1-2 2500/5000 500 x 525 x 600 5-50
PPM-08 210 2-3 2500-4500 550 x 575 x 700 25-200
PPM-10 260 3-5 2000/4000 575 x 625 x 800 55-400


 
 
Specifications and Design are Subject to Change without Notice for any Additional Improvement.
 
» MEDIUM SIZE PIN MILL MOUNTED ON STAND :-
 


Mosels PPM -12, 20 & 25 are MEDIUM capacity PIN MILLS having capacity ranging between 200kg/hr to 1000kg/hr depending upon material and fineness.

Ideal for medium hard materials, these PIN MILLS are mounted on fabricated STAND and are usually BOTTOM OPEN TYPE (B.O.T) For collection of pulverized material, collection BIN is put below mill. For avoiding dust formation, cloth bag is tied up in the outlet of mill, which opens into collection DRUM.
pin mill, pin mill manufacturer, pin mill supplier, pin mill exporter, pin pulveriser, pin pulveriser manufacturer, pin pulveriser supplier, pin pulveriser exporter


TECHNICAL SPECIFICATIONS :

MODEL DIA
MM
H.P. R.P.M. SPACE REQUIRED
L x B x H in mm
CAPACITY
kg./Hr
PPM-12 310 5-7.5 2000/4000 600 x 700 x 1000 105-600
PPM-20 480 10-20 1500/3000 1440 x 1000 x 1350 205-2000
PPM-25 625 20-30 1200/2400 2100 x 1400 x 1600 300-3000


 
 
Specifications and Design are Subject to Change without Notice for any Additional Improvement.
 
» LARGE SIZE PIN MILL WITH SCREW FEEDER :-
 

PREMIUM PULMAN have designed, manufactured and supplied LARGE PIN MILLS up to 1000mm. dia with 100H.P motors and above.

These MILLS are manufactured in M.S/S.S construction. They are supplied with SCREW FEEDER with VARIABLE SPEED DRIVE for REGULATED FEED.

ideal for MEDIUM FINE and COARSE material. The design of ROTOR is modified and PIN is designed to facilitate the same. Medium hard, fiberous and free flowing materials are ground very comfortably. The size of hole in the SCREEN DRUM is selected as per requirement of MESH size of END PRODUCT.

Generally for LARGE outputs, collection is done PNEUMATICALLY with the help of BLOWER. The END PRODUCT is collected in cyclone collector. Fines are collected in FABRIC type DUST COLLECTOR. Output material collection is done by screw conveyor.

For very FINE powder, PREMIUM PIN MILLS are designed with CLASSIFIER system.

The INSTALLATION of such LARGE PIN MILLS have HOPPER of appropriate size, SCREW FEEDER, MAGNET, ROTATING GRINDING PLATE, STATIONARY GRINDING RINGS, SCREEN DRUM, DISCHARGE OUTLET AND MAIN SHAFT mountes on BEARING HOUSING.

THese MILLS are mounted either on PLATFORM or in the SYSTEM STRUCTURE. out put from MILL is conveyed either MECHANICALLY or PNEUMATICALLY for further process.




TECHNICAL SPECIFICATIONS :

MODEL DIA IN
mm
H.P. R.P.M. SPACE REQUIRED (IN mm)
CAPACITY
kg./Hr
L B H
PPM-30 750 40-60 1000/2000 2200 2000 1800 500-5000
PPM-36 900 75-100 800/1600 2400 2300 2000 800-8000
PPM-42 1000 100-125 750/1800 2600 2600 2200 1000-10000


 
 
Capacity depends on material characteristics and fineness expected
Specifications and Design are Subject to Change without Notice for any Additional Improvement.

 
» PIN MILL WITH IN -BUILT CLASSIFICATION SYSTEM :-
 
Pin Whizzer Mill :


Pin mills are manufactured with whizzer cone and whizzer blade. The blower is mounted on the same shaft; pheumatically material is taken through whizzer to cyclone collector.
   
Pin Classifier Mill :


These pin mills have induilt classification system with gap plate arrangement and classifier fan mounted on the same shaft. Mills are supplied with cyclone separator / Dust collector / Pulse Air jet dust collector depending upon the characteristic of material.

 
 
 
» OTHER VERSIONS OF PIN MILL :-
 
Pin Mill With Round Pins :


The stator and rotor discs are fitted with round pins. These pins are riveted on plates. The no. of pins. Pitch, etc. is designed to ssuit the grindability and fineness required.
   
Pin Mill With Both Discs Rotating :


These pin mills have both discs rotating either in one direction or opposite direction. The relative speed is very critical and is maintained within design limits. The discs are rotated by two independent motors. by two independent motors. These pin mills are without These pin mills are without screen and produce fine particle size.
   
Pin Mill With Pneumatic Conveying System :


Pin Mills are supplied with blower, cyclone collector with rotary air lock valve, and fabric bag type dust collector.

 
 
 
» THE INTERNAL DESIGN :-
 
Main Body / Stator

Rotor

Different Types of Rotors

     
Flannel Baloon
  Screen Drum
 

 
 
 
» POPULAR PPLICATION :
 

Paints Powder, Powder Soap, Lithopon, Tark, Celluloid, Dye-stuff, Bakelite Pigments, Animal Charcoal, Sugar, Wheat, Barley, Maize, Rice Powder, Tapioca root, Starch, Tomato, Corn, Powder of sweet potato, cereals, spices, Resin, Bark Pyrethrum flower, Charcoal powder, Dried grass,

Ayurvedic herbs & leaves, Mehendi Leaves, Tobacco leaves, Oyster shells, Bone powder, Soya bean cakes, paper powder, Tea, Bran & husk powder, General manure, Quick lime, Clay, Coal Plaster, Graphite Antimony, Aluminium, Golden Ore, Ceramics, etc.


 
 
 
 


Home
| Profile | Our Group | Demonstration facility | Quality Control | Contact | Inquiry
SEO By : Va Infotech