OUR PRODUCTS RANGE  
 

» Industrial Pulverisers
» Bulk Material Handling Equipment
» Process Equipment
» Projects/Systems
 
 
 
PULVERISERS RANGE  
 

» Hammer Mill
» Micro Pulveriser
» Pin Mill
» Universal Mill
» Turbo Classifier Mill
» Whirlpul Micronizer
» Air Swept Mills
» Disc Mills
» Bucket Elevator
» Air Swept Mill
» Cattle Feed Plant
» Aqua Feed Plant
» Poultry Feed Plant
» Salt Refining Plant
» Spices Plant
» Screw Conveyor
» Bag Weigher
» Salt Refinery
 
 

» SALIENT FEATURES:-
PREMIUM manufacture UNIVERSAL MILLS to gring wide range of materials in desired particle size.
END PRODUCTS.
The BLAST ROTORS have STRAIGHTBAR OR INCLINED BAR OR PLATEBBAR mechanism and are DYNAMICALLY BALANCED. The CLASSIFIER STATORS Drums are FULL SCREEN HALF SCREEN and HALF SERRATED GRINDING TRACK OR THREE QUARTER SCREEN and ONE QUARTER SERRATED GRINDING LINER.
The GRINDING TOOLS are HARDENED ELEMENTSARE are FIXED on PERIPHERY OF BLAST ROTOR. Similariy CLASIFIER STATORS SCREENS ARE FIXED in MILL BODY to get desired degree of FINE POWDER.
LARGE SIZE are with AUTO FEEDING and AUTO COLLECTION arrangement mills

===== ====== ============ ======== ======= ===
Demonstration Facility Available....
===== ====== ============ ======== ======= ===
 
» IMPORTANT TECHNICAL INFORMATION:
 


This is a very common and standard mill for grinding many materials, The grinding is effected in a highly turbulent air, starting from inside edge and ending on the outside edge of the grinding bars. Because of air intake and circulation during grinding the material does not get heated. The mill has stator and rotor. The rotor is perfectly balanced. The stator is in drum form and has both liners, which grind the material, and sieve which permit the pulverised particles to escape out of grinding chambers. The material fed in the center and discharged is form periphery. By varying the R.P.M. of rotor and feed rate fineness and out put are controlled.

 
 
 
» JUNIORSERIES PREMIUM UNIVERSAL MILLS :-
 

These MILLS have small diameter ranging from 160mm,to300mm.
These MILLS have either FEED TRY or FEED HOPPER and are mounted on CABINET or stand. A provision for AIR BALOON is provided for AIR to ESCAPE. LAB MODELS are usually CABINET MOUNTED and PRODUCTION MODELS are mounted on RECTANGULAR STAND. These models are mounted on RECTANGULAR STAND. These models are mounted on RECTANGULAR STAND. These models are BOTTOM OPEN TYPE (B.O.T) and Blast Rotor and CLASSIFIER STATOR can be given in S.S. Construction. Technical Specification of these models are as under


TECHNICAL SPECIFICATIONS :-

MODEL Rotor Dia
mm
H.P Capacity
KG/HR.
APP WT.
KG.
Space Required
L xW x H
PUM JR-160 160 2.0 5-50 70 500 x 525 x 600
PUM JR-200 210 3.0 25-100 125 550 x 575 x 700
PUM JR-250 260 5.0 50-200 170 575 x 625 x 800
PUM JR-300 310 7.5 100-400 250 675 x 700 x 1000


 
 
Specification and design are subject to change without notice for any additional improvement


» SENIOR SERIES PREMIUM UNIVERSAL MILLS :-
 




These mills are in BIGGER DIAMETER ranging from 500 mm to 1000 mm, H.P of MAIN MOTOR will depend upon model, capacity, Fineness of END PRODUCT and type of material.

These MILLS are provided with SCREW FEEDER for uniform and regulated flow and are suitable either for MECHANICAL DISCHARGE / CONVEYEYING or PNEUMATIC COLLECTOR and AIR LOCK is provided For DUSTY and pungent material reverse Pulse Air Jet Dust Collector and aspiration System is recommended Technical Specification are as under

TECHNICAL SPECIFICATIONS :-

MODEL Rotor Dia
mm
H.P Capacity
KG/HR.
APP WT.
KG.
Space Required
Main M/c. Screw Feeder L xW x H H1
PUM SR-500 480 15 1 200-600 600 1410x1250x1610 1010
PUM SR-625 625 25 1 400-800 1050 1500x1400x1775 1175
PUM SR-750 750 50 1 600-1000 1400 1600x1500x1900 1285
PUM SR-900 900 75 1 800-1500 1650 1800x1700x2100 1510
PUM SR-1000 1000 100 1 1000-2500 1850 1800x1800x2250 1650


 
 
Specification and design are subject to change without notice for any additional improvement
 
» IMPORTANT ACCESSORIES :
 
PULSE AIR JET DUST COLLECTOR
MILL WITH BAG FILTER AIR RELIEF SYSTEM
MILL WITH PNEUMATIC CONVEYING SYSTEMS
CROSS SECTION OF UNIVERSAL MILL WITH SCREW FEEDER

 
 
 
» BLAST ROTORS :
 



A. BAR TYPE BLAST ROTOR:

PREMIUM UNIVERSAL MILLS are provided with BAR TYPE BLAST ROTORS. The BARS are either STRAIGHT BARS or INCLINED BARS. The speed of BLAST ROTOR, Type of BARS will decide FINENESS of end products. As shown in the picture BARS are FITTED in ROTOR END DISCS and are FIRMLY LOCKED.

B. PLATE TYPE BLAST ROTOR:

The Blast Rotor is same but the GRINDING TOOLS are in the shape of PLATES as Shown in the picture Beside the Speed and CLASSIFIER SCREEN Size of Hole the distance between outer EDGE of BLAST ROTOR and CLASSIFIER SCREEN DRUM will beside the FINENESS of END PRODUCT.


 
 
 
» CLASSIFIER STATORS :
 




C. FULL SCREEN CLASSIFIER STATOR:

This is FULL SCREEN DRUM. SCREEN is fixed between Two RINGS and BARS are SCREWED on END RINGS to REINFORCE and SUPPORT the screen. The size of SCREEN is selected as per requirement of FINENESS.

D. SCREEN CUM TRACK STATOR:

This has SCREEN of required HOLE Size and GRINDING TRACKS (SERATTED SEGMENTS). The portion of such TRACKS is decided upon the fineness of END PRODUCT and type of product.
 
 
 
»POPULAR APPLICATIONS :
 
  • Ayurvedic Products
  • Bakelite Sodium
  • Alginate
  • Besan
  • Carbon Powder
  • Casein
  • Ceramic Powder
  • Ceramic Colour
  • Chemical & Dye Stuff
  • Coal
  • Confectioneries
  • Ferrous sulphate
  • Fertilisers
  • Food stuffs & Gram Flour
  • Guar Gum
  • H.Acid
  • Insecticides and Pesticides
  • Isabgol
  • Metallic compound
  • Naphthalene
  • Nilgiri
  • Ores & Minerals
  • Oyster Shells
  • Paints &
  • Pigments
  • Pharmaceuticals
  • Plastic Films
  • Resin
  • Salt
  • Saw dust
  • Sea Food
  • Sintered PVC
  • Sodium
  • Sodium
  • Alginate
  • Soft Metals
  • Spices
  • Starch
  • Sugar
  • Tea
  • Textile
  • Turmeric
  • Wheat


 
 
 
 


Home
| Profile | Our Group | Demonstration facility | Quality Control | Contact | Inquiry
SEO By : Va Infotech